Tekla/steel detailing Question paper-10

                       

1).What are the three grade identification colors for ASTM F1554 anchor rods?

F1554-GR.36_BLUE IN COLOUR.

F1554-GR.55_YELLOW IN COLOUR.

F1554-GR.55_RED IN COLOUR.

2).When columns do not have enough local strength, what type of reinforcing

is required to reinforce for web panel-zone shear at a moment connection?

EITHER DOUBLER PLATES OR DIAGONAL STIFFENERS

3.What material type is commonly used for rolled floor plate?

ASTM A786  IS THE MOST COMMONLY USED ROLLED

FLOOR PLATE.

4.Why are fillet welds preferred over groove welds?

Fillet welds generally require less weld metal than groove welds. Additionally, fillet welds do

not generally require beveling and similar base metal preparation. As a result, fillet welds are

generally more economical to make than groove welds. Thus, fillet welds are preferred.

5.Draw Flare Bevel Weld Symbol & Its Condition?

FLARE WELD IS MOST COMMONLY USED TO JOIN  A ROUND OR CURVED PIECE TO

    A FLAT PIECE.

6.Full form of SEOR and GOL?

SEOR_STRUCTURAL ENGINEER OF RECORD.

GOL_GAUGE ON LEG.

7.What is the material grade for twist of type bolts?

 

ASTM F1852 .

8.Please write down the types of beam?

1.sloped beam

2.skwed beam

3.curved beam

4.canted beam

5.hip and valley beam.

9.what is the distance between  hoop to hoop distance in ladder?

4'-0.

10.what is masonry?

The part of building that are made of stone or brick.